To implement the solution, you will need one of the devices which supported CAN-buses like MT-24, MT-25 or any device from the MT X CAN series and locking relay. The devices have difference in additional functions, for example, the MT-25 device has voice support, and in the devices of the MT X CAN series a CAN-bus scanner is implemented to conveniently search for the necessary parameters for monitoring. When you have decided on the device, you must perform the following steps:
  1. Connect the vehicle's CAN-bus to the GNSS Tracker;
  2. Download ready-made CAN scripts from our VEGA server;
  3. Connect the locking relay to the GNSS Tracker and plug it into the gas pump control circuit (power to the injectors, the signal circuit of the crankshaft sensor, etc.);
  4. Connect power from the on-board network to the GNSS Tracker and relay;
  5. Set up a device and a cloud monitoring service (WIALON or any other, including your own);
  6. Now you can control the vehicle’s location and view saved movement tracks, as well as remotely *: open/close the central locking system, turn on/off the emergency light, headlights, block for engine start, turn off a running engine, etc.

*The list of available parameters depends on the specific car model.
The configuration of CAN sensors for a specific vehicle model can be downloaded from the VEGA SFTP server. Downloading and uploading of the configuration of CAN sensors is available directly to the GNSS Tracker.