- Solutions
- Products
- All Products
- Monitoring Devices
Vega MT-5Monitoring Device | Internal Antennas | With Battery | BLE
Vega MT X IntMonitoring Device | Internal Antennas | Built-in Battery | CAN
Vega MT X ExtMonitoring Device | External Antennas | Built-in Battery | CAN
Vega MT X LTEMonitoring Device | External Antennas | Built-in Battery | CAN | LTE modem
Vega MT-21Monitoring Device | Internal Antennas | Without Battery- Vega MT-22Monitoring Device | Internal Antennas | With Battery | Voice Communication
- Vega MT-23Monitoring Device | Internal Antennas | With Battery
- Vega MT-24Monitoring Device | Internal Antennas | With Battery | CAN-processor
Vega MT-25Monitoring Device | External GNSS antenna | With Battery | CAN-processor | Voice
- Searching Devices
Vega M100Searching Device | 2400 mAh | IP54
Vega M110Searching Device | 2400 mAh | IP67- Vega M200Searching Device | 2400 mAh | IP54 | RF tag
- Vega M210Searching Device | 2400 mAh | IP67 | RF tag
- Vega M300Searching Device | 2400 mAh | IP54 | RF tag | Engine locking relay
- Vega M310Searching Device | 2400 mAh | IP67 | RF tag | Engine locking relay
Vega M50Searching Device | 1200 mAh | IP54
Vega M410Searching Device | 12800 mAh | IP67 | 2 SIM
- Additional Equipment
Vega RK-2.4Radio Channel Pack | Reader | Engine locking relay | RF tag
Vega SM-1Microphone
ButtonsButtons
IndicatorsLight Indicators | Sound Indicators
Vega ST-1Temperature Sensor
Vega SD-1Speaker
GLONASS/GPS AntennasGLONASS/GPS Antennas
GSM AntennasGSM Antennas
Connectors with WiresConnectors with Wires | Fuse Holder
Vega K-232UART<–>RS-232 converter | Power output 5 V
Vega SA-1Antijammer | Open drain output
Vega RP-1Port replicator | 4 open drain outputs | 6 multifunctional inputs
- Software
- Dealers map
- Info
- Company
- Updates
The office occupies two adjacent buildings and includes production facilities, office premises and warehouses. Here, almost the entire production cycle takes place from the idea to the shipment of th
Our engineers are engaged in the development of circuits for printed circuit boards at a high level.
The PCB layout is carried out by highly qualified specialists.
Suitable for specific device and comfortable in using housing design is developed at first.
Our specialists design molds for molding casings on modern equipment in our production in the Berdsk city.
The CNC milling machine makes it possible to manufacture molds of complex shapes.
Specialists manually finish the mold making if it's necessary.
Casing casting is carried out on modern equipment.
Leading engineers of the IT department carry out the development, testing and support of software products.
Our company pays much attention to the software part of the product, because this is the guarantee of its smooth operation.
Surface mounting of SMD-components is carried out on two modern automatic lines operating simultaneously.
Qualified employees supervise the production process, provide training and maintenance of the line.
The YAMAHA YSM20 SMD component installation machine can install up to 90,000 components per hour.
The electric cutter will quickly and qualitatively separate the group blanks of the printed circuit boards for further work.
Our company produces wires for all its needs independently.
The automatic line Gamma 255 allows you to cut the wires and perform their crimping by contacts according to the program programmed by the operator.
The automatic line KODERA allows to cut the wires with length up to 4 meters.
The automatic line controls the quality of the produced contacts. After that an each connector is assembled and checked manually.
More than ten qualified installers of radio electronic equipment work in our company.
Workplaces are equipped with everything necessary.
All products are subject to mandatory and thorough testing by experienced employees.
The devices are packed in individual containers according to the delivery kit.
At the packaging site, the staff quickly and accurately completes the order.
Individual approach to each client is guaranteed.